High-Performance Columns

Our high-performance columns offer superb temperature-stability resulting in low bleeding characteristic and a high system sensitivity. This allows lower limits of detection (LOD), faster system stabilization and shorter conditioning time.  

SH-I-1MS

  • Non-polar phase: Crossbond 100% dimethyl polysiloxane
  • Tested and guaranteed for ultra-low bleed; improved signal-to-noise ratio for better sensitivity and mass spectral integrity.
  • General-purpose columns for arson accelerants, essential oils, hydrocarbons, pesticides, PCB congeners (e.g., Aroclor mixes), sulfur compounds, amines, solvent impurities, simulated distillation, oxygenates, gasoline range organics (GRO), refinery gases.
  • Equivalent to USP G2 phase.
  • Similar phases: Rxi-1MS, HP-1ms UI, HP-1ms, DB-1ms UI, DB-1ms, Ultra-1, VF-1ms, SPB-1, Equity-1, BP-1; ZB-1, ZB-1ms,007-1, AT-1ms
  • Temp. Range: -60 to 330/350°C
ID df 15 m 20 m 25 m 30 m 50 m 60 m
0.15 mm 0.15 µm - 227-36001-01 - - - -
2.00 µm - 227-36002-01 - - - -
0.18 mm 0.18 µm - 221-75921-20 - - - -
0.36 µm - 227-36003-01 - - - -
0.20 mm 0.33 µm - - 227-36004-01 - 227-36004-02 -
0.25 mm 0.25 µm 227-36005-01 - - 221-75923-30 - 227-36005-02
0.50 µm 227-36006-01 - - 227-36006-02 - 221-75924-60
1.00 µm 227-36007-01 - - 227-36007-02 - 227-36007-03
0.32 mm 0.25 µm 227-36008-01 - - 221-75926-30 - 227-36008-02
0.50 µm 227-36009-01 - - 227-36009-02 - 227-36009-03
1.00 µm - - - 227-36010-01 - 221-75928-60
4.00 µm - - - 227-36011-01 - -
0.53 mm 0.50 µm 227-36012-01 - - 227-36012-02 - -
1.00 µm 227-36013-01 - - 227-36013-02 - -
1.5 µm 227-36014-01 - - 227-36014-02 - 227-36014-03

Top of This Page